Mounting As A Wall-Instrument - Datcon DT9000 N Operating Instructions Manual

Removing the front
cover
10

4.3. Mounting as a wall-instrument

In order to remove the front cover, first remove the four
fixing screws as shown in the drawing. A screwdriver of
appropriate head-size only should be used. Using
screwdrivers with inappropriate head-size may cause a
damage in the screws' heads or in the instrument front
panel.
Remove the screws by turning them in anticlockwise
direction as shown in the drawing Step (1). The screws are
secured against falling out. After this you can simply take
away the front cover from the housing (2) and you can open
it by turning it downwards (3). Plastic ties are used to fasten
the front cover to the housing, preventing it from falling.
DT9000 N
20180614-V020180614