Description Of The Menu Items - Datcon DT9000 Operating Instructions Manual





Access is possible by
supervisor code only.
68

10.5. Description of the menu items

You find a description of the menu items in the following
part. A description on the handling of the menu is in
Chapter 7. Settings.
Display modes of limit output status (Limit Displaying)
[Default Factory Setting: OFF]

•
Switched off (OFF)
It never displays the limit output status.

•
Dynamic button (Dynamic Button)
As long as the ENTER is being pressed down.

•
Timed button (Timed Button)
As long as the ENTER is being pressed down + for 2.5
seconds.

•
Static button (Static Button)
The display can be switched ON/OFF by ENTER.

•
Automatically: when changes (Auto: Change)
For a period of 2.5 sec, after a change has taken place in
the output. Disabling: by ENTER

•
Automatically: periodical (Auto: Periodical)
Periodical: ON/OFF in each 2.5 seconds. Disabling: by
ENTER.

•
Always ON (ON)
Disabling: by ENTER.
Limit output configuration sub-menu No.1.(Limit 1)
Detailed description in the chapters 7.3., 7.4., 7.5..
Limit output configuration sub-menu No.2. (Limit 2)
It is the same as for limit output No.1., but everything
pertains to limit output No.2. Detailed description in the
chapters 7.3., 7.4., 7.5..
Decimal point position select (Decimal Point)
The position of the decimal point in the display can be
defined here, or you can switch the decimal point off.
[Default factory setting: 3]
DT9000
20171205-V2