Table of Contents
Advertisement
DT9000
Exit from the menu item 1. After you have performed the setting, press the MENU
Exit from the menu
20171205-V2
button. This takes you out from the menu item, and you
see this:
.
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in,
go on with the operation from point 3 of the Sequence of
operations.)
(3. If you do not want to exit from the menu because you
want to perform other settings too, you may press the ▲
button to select the desired menu item.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
(Exit) are shown on the
59
Advertisement
Table of Contents
