Status Letters - Avaya J100 Series User Manual

Hide thumbs Also See for J100 Series:
Table of Contents

Advertisement

Bluetooth (J159/J179 only) – This icon is shown if the phone supports Bluetooth headset
connection. See
-
Headset Connected – A dot within the icon indicates that the Bluetooth headset is
connected.
Connection Failure – This icon indicates a connection issue.
- If the phone has lost its connection to the telephone system, then if configured by your
maintainer, after a few minutes it use a alternate system. If that is successful, an R
(Resilience) is shown in the display.
Missed Calls – This icon indicates that you have had missed calls. The number next to
the icon indicates the number of different callers. Pressing the button opens your call log at
the missed calls display. See
Related links
Status Display
on page 24

Status Letters

The top lines of the display can include the following status letters:
• B = Barred – The system administrator has prohibited you from making external calls. You
can only make internal calls.
• G = In Group – You have been configured as a member of a hunt group and your
membership of the group is enabled. This means you may receive calls targeted to the hunt
group. See
Group Membership
• O = Out of Service – A group of which you are a member is in night service mode. Calls to
the group are diverted to its fallback if set or otherwise to voicemail if available. See
Service Status and Fallback
• R = Resilience – Your phone is working in resilience mode. This is used when a problem
with your telephone system or the connection to it means another system is providing support
for your phone. In this mode, some features may not be available and calls may be routed
differently.
• S = System Alarm – If you are configured as a system administrator, this indicates a system
alarm. See
Reporting System Alarms
• T = Twinned – Your phone is internally twinned with another extension. Calls to you alert on
both phones and can be answered at either. See
• ! = Cannot Retrieve Settings – This indicates that the phone was not able to retrieve all you
user settings. If this happens, it may limit some telephone functions. Contact your system
administrator.
Related links
Status Display
on page 24
April 2020
Using Bluetooth Headsets
Using the Call Log
on page 126.
on page 128
on page 175.
J100 Series Phone User Guide
Comments on this document? infodev@avaya.com
on page 89.
on page 105.
Twinning Button
Status Display
.Group
on page 138.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J129J139J159J169J179

Table of Contents