Bloc Dialing; Dialing A Number In En-Bloc Mode; Enabling/Disabling En-Bloc Dialing - Avaya J100 Series User Manual

Making Calls
En-Bloc Dialing
Through the phone's menus you can select whether you want to use traditional or en-bloc dialing
when making calls. Your chosen setting is then applied whenever you use a phone that supports
en-bloc dialing.
• En-bloc dialing allows you to compose and edit the number to dial on your phone's display
before it is sent to the phone system to be dialed.
• With traditional dialing, when you start dialing a number on your phone, the phone
immediately connects to the telephone system and starts passing the digits you dial to the
phone system. You cannot correct the digits you have already dialed except by ending the
call and starting over.
Related links
Making Calls on page 29

Dialing a Number in En-Bloc Mode

Enabling/Disabling En-Bloc Dialing

Dialing a Number in En-Bloc Mode
Procedure
1. With no connected call, start dialing. Do not lift the handset or select the headset, speaker
or an appearance button before dialing:
• You can use the left cursor key or the Bksp key to delete the previous digit dialed.
• Press Clear to erase the whole number dialed so far.
2. When you have completed the number, you can select how you want to make the call:
• Lift the handset to make a call using the handset.
• Press the Call soft key or OK button to start the call using the phone's default handsfree
audio path (speaker or headset). You can also press one of your idle call appearance
buttons to make the call using that appearance.
• Press the
• Press the
Related links
En-Bloc Dialing on page 34
Enabling/Disabling En-Bloc Dialing
You can enable or disable your en-bloc dialing setting through the phone's Features menu.
April 2020
on page 34
on page 34
HEADSET button to start the call on a headset connected to your phone.
SPEAKER button to start the call on your phone's handsfree speaker.
J100 Series Phone User Guide
Comments on this document? infodev@avaya.com
34