Auto Answer Button; Call Forward All Button; Call Park Button - Avaya J100 Series User Manual

Auto Answer Button

A button configured with this action can be used to switch 'internal auto-answer' on or off. When
'internal auto-answer' is on, the button's red lamp is lit. Pressing the button again turns 'internal
auto-answer' off.
This type of button is not supported on J139 phones.
Related links
Programmable Button Features

Call Forward All Button

A button with this action can be used to switch 'forwarding unconditional' on/off.
• If set with a preset number, that number is used as the forwarding destination.
• If set without a number, when the button is pressed you are asked to confirm your existing
'forward unconditional' destination number or to enter a new number.
The button's red lamp is lit when forwarding is enabled.
Related links
Programmable Button Features

Call Park Button

A button set to this action can be used to park and unpark calls. The button can be set with or
without a park slot number.
• When associated with a specific park slot number, the button can park and unpark a call from
that park slot. When a call has been parked in that park slot, the button's lamp flashes. Green
if the call was parked using that button, red if parked by another method. Pressing the button
again retrieves the call.
• When not associated with a specific park slot number:
- If pressed while you have a call connected, that call is parked using a park slot number
assigned by the system based on your extension number.
- If pressed while you have no call connected, your phone displays details of your parked
calls and allow you to unpark a selected call.
- When you have calls that you parked (other than Park & Page) or others parked against
your extension, the button's lamp flashes.
Related links
Programmable Button Features
April 2020
on page 133
on page 133
on page 133
J100 Series Phone User Guide
Comments on this document? infodev@avaya.com
Programmable Button Features
135