Auto Display Waiting Call; Inactivity Timer (Auto-Return) - Avaya J100 Series User Manual

Auto Display Waiting Call

By default, when you are connected on a call, the phone shows details of that call and soft key
actions you can perform for that call. In order to see details of a waiting call, you need to scroll the
display using the up and down cursor buttons.
You can opt to have the phone automatically show details of a waiting call when one alerts the
phone and soft key actions that you can perform on the waiting call. If you use the scroll keys to
return the display focus to the currently connected call, the focus automatically returns to the
waiting call after a few seconds.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Auto Display Waiting Call.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
Display Controls on page 143

Inactivity Timer (Auto-Return)

You can set a timer to return the phone to its normal call display after a set period of phone
inactivity.
Note that the time is not applied to the
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Use the up and down cursor keys to highlight Auto Return.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Disabled - Do not use the inactivity timer.
• 30/60 - Apply the inactivity timer after the selected number of seconds.
6. Press Save.
April 2020
PHONE key and then press Features.
and Visual Voice menus.
PHONE key and then press Features.
J100 Series Phone User Guide
Comments on this document? infodev@avaya.com
Auto Display Waiting Call
147