Montage; Package Content; Proper Thermostat Location - Salus BTRP230V Full User Manual

2. Montage

2.1 Package content

1) BTRP230V(50) thermostat
2) Short instruction
3) Mounting screws

2.2 Proper thermostat location

Please note:
The ideal position to thermostat mounting is about 1,5m under floor level far from heating or cooling sources.
Thermostat can't be exposed to sunlight or any extreme conditions like for example draft.
Because of fire and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and flammable liquids (eg coal dust). In case
if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.
Furthermore, thermostat can't be used in condensation of water vapor conditions and be exposed to water action.
Wall mounting
Mounting: to mount thermostat you can use accesories included with the set (mounting screws). Remove back housing to mount it to the wall box. After
attachement put together front and back housing.
1
Make sure that wires are not connected to 230V. Then connect the
thermostat. Please refer to 2.3 chapter - Connection Description.
6
1
2
5
Install the decorative frame and then slide the front of the thermostat
onto its back. The thermostat is ready to work. You can set the desired
temperature with the buttons.
2
3
3
Mount the thermostat like in the pictures above
(use designed holes for screws).
6
4