Table of Contents
Advertisement
2. Montage
2.1 Package content
1) HTRS230V(30) thermostat
2) Short instruction
3) Mounting screws
2.2 Proper thermostat location
Please note:
The ideal position to thermostat mounting is about 1,5m under floor level far from heating or cooling sources. Thermostat can't be
exposed to sunlight or any extreme conditions like for example draft.
Because of fire and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and flammable liquids (eg coal dust). In case
if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.
Furthermore, thermostat can't be used in condensation of water vapor conditions and be exposed to water action.
2.3 Wall mounting
Mounting: to mount thermostat you can use accesories included with the set (mounting screws). Remove back cover to mount the plate to the wall.
After this just attach thermostat to the plate right into designed holes in the plate.
6
1
1
Open the housing with a screwdriver - as shown in the pictures above.
3
2
3
2
Connect wires properly, mark the
correct possition on the wall and
mount the rear case to the wall.
Advertisement
Table of Contents
