Product Overview; Montage; Package Content; Proper Thermostat Location - Salus HTRP-RF(50) Full User Manual

Table of Contents

2. Product Overview

HTRP-RF(50) is a room temperature thermostat that is used for wireless control of iT600 series devices such as: KL08RF wiring centre, TRV

radiator valve and RX10RF boiler receiver. In combination with Universal Gateway UGE600 this regulator can be controlled over the Internet using SALUS

SmartHome app (Online mode). Without Internet connection (Offline mode) thermostat works locally, but its communication with other devices must be

done through the coordinating unit - CO10RF. Full version of the PDF manual instruction is available on the website www.salus-controls.eu

2.1 Montage

2.2 Package content

1) HTRP-RF(50) thermostat

2) 2x AA batteries

3) Short instructions

4) Mounting screws

2.3 Proper thermostat location

Please note:

The ideal position to thermostat mounting is about 1,5m under floor level far from heating or cooling sources. Thermostat can't be

exposed to sunlight or any extreme conditions like for example draft.

Because of fire and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and flammable liquids (eg coal dust). In case

if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.

Furthermore, thermostat can't be used in condensation of water vapor conditions and be exposed to water action.

Wall mounting

Mounting: to mount thermostat you can use accesories included with the set (mounting screws). Remove back cover to mount the plate to the wall.

Now please insert the batteries inside the thermostat. After this just attach thermostat to the plate right into designed holes in the plate.