Montage; Package Content; Proper Thermostat Location - Salus HTRP230V Full User Manual

2. Montage

2.1 Package content

1) HTRP230V(50) thermostat
2) Short instruction
3) Mounting screws

2.2 Proper thermostat location

Please note:
The ideal position to thermostat mounting is about 1,5m under floor level far from heating or cooling sources.
Thermostat can't be exposed to sunlight or any extreme conditions like for example draft.
Because of fire and explosion risk there is not allowed to use thermostat in atmosphere of explosive gases and flammable liquids (eg coal dust). In case
if any of listed dangers occur you have to use additional protection measures – anti-dust and explosive gases (tight cover) or prevent their formation.
Furthermore, thermostat can't be used in condensation of water vapor conditions and be exposed to water action.
Wall mounting
Mounting: to mount thermostat you can use accesories included with the set (mounting screws). Remove back cover to mount the plate to the wall.
Now please insert the batteries inside the thermostat. After this just attach thermostat to the plate right into designed holes in the plate.
6
1
Open the housing with a screwdriver - as shown in the pictures above.
Without an additional
temperature sensor.
2
3
With an additional
temperature sensor.