Appendices; Symbols Used - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

Appendices

Power supply
Output voltage
Battery charger
Reference number
Storage and transport in original packaging
Storage and transport without packaging
Operation
Protection rating
Input voltage
Cockpit app
Reference number
Supported operating system
Website for download
Torque values of the screw connections
Using a torque wrench, tighten the corresponding screws alternately in several cycles until the specified tightening
torque is reached.
Screw connection
Tube adapter on prosthetic foot
Tube clamp of the knee joint
Proximal prosthesis components with pyramid receiver
Proximal prosthesis components with threaded connect­
or
Flexion stop
17 Appendices

17.1 Symbols Used

Legal manufacturer
Type BF applied part
Compliance with the requirements according to "FCC Part 15" (USA)
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Non-ionising radiation
Protection against penetration of solid foreign objects with a diameter greater than 1 mm, no pro­
tection against water
Dust-proof, protected against strong jets of water
50
12 V
4E60*
-25 °C to 70 °C/-13 °F to 158 °F
-25 °C to 70 °C/-13 °F to 158 °F
Max. 93% relative humidity, non-condensing
5 °C to 40 °C/41 °F to 104 °F
Max. 93% relative humidity, non-condensing
IP40
12 V
Cockpit 4X441-IOS=* / 4X441-Andr=V*
iOS 9.3 / Android 4.0.3 or higher
http://www.ottobock.com/cockpitapp
Tightening torque
15 Nm / 133 lbf. In.
7 Nm / 62 lbf. In.
15 Nm / 133 lbf. In.
10 Nm / 89 lbf. In.
0.6 Nm / 5 lbf. In.
Genium X3 3B5-3/3B5-3=ST