Dhcp Ip/Mac Binding Settings; Dynamic Ip - Fortinet FortiGate FortiGate-5001 Administration Manual
Fortigate 5000 series
Hide thumbs
Also See for FortiGate FortiGate-5001:
- Quick start manual (2 pages) ,
- Introduction manual (77 pages) ,
- Quick manual (37 pages)
Table of Contents
Advertisement
System DHCP
DHCP IP/MAC binding settings
Dynamic IP
FortiGate-5000 series Administration Guide
Delete icon. Delete an IP/MAC binding pair.
Edit/View icon. View or modify an IP/MAC binding pair.
Figure 33: IP/MAC binding options
Name
IP Address
MAC Address
To add a DHCP IP/MAC binding pair
1
Go to System > DHCP > IP/MAC Binding.
2
Select Create New.
3
Add a name for the IP/MAC pair.
4
Add the IP address and MAC address.
5
Select OK to save the IP/MAC pair.
You can view the list of IP addresses that the DHCP server has assigned, their
corresponding MAC addresses, and the expiry time and date for these addresses.
Interface
Select to display its dynamic IP list.
IP
The IP addresses that the DHCP server has assigned.
MAC
The corresponding MAC addresses for the dynamic IP addresses.
Expire
The expiry time and date for the dynamic IP addresses and their corresponding
MAC addresses.
To view the dynamic IP list
1
Go to System > DHCP > Dynamic IP.
2
Select the interface for which you want to view the list.
Enter a name for the IP/MAC address pair.
Enter the IP address for the IP and MAC address pair. The IP address must
be within the configured IP range.
Enter the MAC address of the device.
01-28008-0013-20050204
Dynamic IP
85
Advertisement
Table of Contents
