Fortinet FortiGate FortiGate-5001 Administration Manual page 194

CLI configuration
194
ospf-interface command keywords and variables (Continued)
Keywords and variables
status
{disable | enable}
transmit-delay
<seconds_integer>
Example
This example shows how to assign an OSPF interface configuration named test to
the interface named internal and how to configure text authentication for this
interface.
config router ospf
config ospf-interface
end
This example shows how to display the settings for the OSPF interface configuration
named test.
config router ospf
config ospf-interface
get
end
This example shows how to display the configuration for the OSPF interface
configuration named test.
config router ospf
config ospf-interface
show
end
01-28008-0013-20050204
Description
Enable or disable OSPF on
this interface.
The estimated time, in
seconds, required to send a
link state update packet on this
interface.
OSPF increments the age of
the LSAs in the update packet
to account for transmission
and propagation delays on the
interface.
Increase the value for
transmit-delay on low
speed links.
The valid range for
seconds_integer is 1 to
65535.
edit test
set interface internal
set ip 192.168.20.3
set authentication text
set authentication-key a2b3c4d5e
end
edit test
edit test
Default Availability
All models.
enable
All models.
1
Fortinet Inc.
Router