VPN configuration procedures
PPTP configuration procedures
L2TP configuration procedures
278
5
Place the policy in the policy list above any other policies having similar source and
destination addresses.
If the FortiGate unit will act as a PPTP server, perform the following tasks on the
FortiGate unit:
1
Create a PPTP user group containing one user for each PPTP client. See
page
243.
2
Enable PPTP on the FortiGate unit and specify the range of addresses that can be
assigned to PPTP clients when they connect. See
3
Configure the PPTP server.
4
Configure the PPTP clients.
To perform Steps 3 and 4, see the
To arrange for PPTP packets to pass through the FortiGate unit to an external PPTP
server instead, you must:
1
Create a PPTP user group containing one user for each PPTP client. See
page
243.
2
Enable PPTP on the FortiGate unit and specify the range of addresses that can be
assigned to PPTP clients when they connect. See
3
Configure PPTP pass through on the FortiGate unit.
4
Configure the PPTP clients.
To perform Steps 3 and 4, see the
To configure a FortiGate unit to act as an L2TP network server, perform the following
tasks on the FortiGate unit:
1
Create an L2TP user group containing one user for each remote client. See
page
243.
2
Enable L2TP on the FortiGate unit and specify the range of addresses that can be
assigned to remote clients when they connect. See
3
Configure the L2TP server.
4
Configure the remote clients.
To perform Steps 3 and 4, see the
FortiGate VPN
FortiGate VPN
FortiGate VPN
01-28008-0013-20050204
"PPTP range" on page
Guide.
"PPTP range" on page
Guide.
"L2TP range" on page
Guide.
VPN
"User" on
270.
"User" on
270.
"User" on
271.
Fortinet Inc.