CLI configuration
182
config range
edit <id_integer>
get
end
config range
edit <id_integer>
show
end
Note: Only the prefix keyword is required. All other keywords are optional.
range command keywords and variables
Keywords and
variables
advertise
{disable | enable}
prefix
<address_ipv4mask>
substitute
<address_ipv4mask>
substitute-status
{disable | enable}
Example
This example shows how to set the prefix for range 1 of area 15.1.1.1.
config router ospf
config area
end
This example shows how to display the settings for area 15.1.1.1.
config router ospf
config area
get
end
01-28008-0013-20050204
Description
Enable or disable advertising the specified
range.
Specify the range of addresses to
summarize.
Enter a prefix to advertise instead of the
prefix defined for the range. The prefix
0.0.0.0 0.0.0.0 is not allowed.
Enable or disable using a substitute prefix. disable All models.
edit 15.1.1.1
config range
edit 1
set prefix 1.1.0.0 255.255.0.0
end
edit 15.1.1.1
Router
Default
Availability
All models.
enable
All models.
0.0.0.0
0.0.0.0
All models.
0.0.0.0
0.0.0.0
Fortinet Inc.