Dhcp Server Settings - Fortinet FortiGate FortiGate-5001 Administration Manual
Fortigate 5000 series
Hide thumbs
Also See for FortiGate FortiGate-5001:
- Quick start manual (2 pages) ,
- Introduction manual (77 pages) ,
- Quick manual (37 pages)
Table of Contents
Advertisement
Server
DHCP server settings
82
Figure 29: Server options
Name
Enter a name for the DHCP server configuration.
Interface
Select the interface for which to configure the DHCP server.
Domain
Enter the domain that the DHCP server assigns to DHCP clients.
Default Gateway
Enter the IP address of the default gateway that the DHCP server
assigns to DHCP clients.
IP Range
Enter the starting IP and ending IP for the range of IP addresses that this
DHCP server assigns to DHCP clients.
Network Mask
Enter the netmask that the DHCP server assigns to DHCP clients.
Lease Time
Select Unlimited for an unlimited lease time or enter the interval in days,
hours, and minutes after which a DHCP client must ask the DHCP server
for new settings. The lease time can range from 5 minutes to 100 days.
DNS Server
Enter the IP addresses of up to 3 DNS servers that the DHCP server
assigns to DHCP clients.
WINS Server
Add the IP addresses of one or two WINS servers that the DHCP server
assigns to DHCP clients.
Option
Up to three custom DHCP options that can be sent by the DHCP server.
Code is the DHCP option code in the range 1 to 255. Option is an even
number of hexadecimal characters and is not required for some option
codes. For detailed information about DHCP options, see RFC 2132,
DHCP Options and BOOTP Vendor Extensions.
01-28008-0013-20050204
System DHCP
Fortinet Inc.
Advertisement
Table of Contents
