Fortinet FortiGate FortiGate-5001 Administration Manual page 185

Router
FortiGate-5000 series Administration Guide
virtual-link command keywords and variables (Continued)
Keywords and
variables
peer
<address_ipv4>
retransmit-
interval
<seconds_integer>
transmit-delay
<seconds_integer>
Example
This example shows how to configure a virtual link.
config router ospf
config area
end
This example shows how to display the settings for area 15.1.1.1.
config router ospf
config area
get
end
This example shows how to display the configuration for area 15.1.1.1.
config router ospf
config area
show
end
01-28008-0013-20050204
Description
The router id of the remote ABR.
0.0.0.0 is not allowed.
The time, in seconds, to wait before
sending a LSA retransmission. The
value for the retransmit interval
must be greater than the expected
round-trip delay for a packet. The
valid range for seconds_integer
is 1 to 65535.
The estimated time, in seconds,
required to send a link state update
packet on this virtual link.
OSPF increments the age of the
LSAs in the update packet to
account for transmission and
propagation delays on the virtual
link.
Increase the value for transmit-
delay on low speed links.
The valid range for
seconds_integer is 1 to 65535.
edit 15.1.1.1
config virtual-link
edit vlnk1
set peer 1.1.1.1
end
edit 15.1.1.1
edit 15.1.1.1
CLI configuration
Default Availability
0.0.0.0 All models.
All models.
5
All models.
1
185