Dhcp Ip/Mac Binding Settings; Dynamic Ip - Fortinet FortiGate FortiGate-200A Administration Manual

System DHCP

DHCP IP/MAC binding settings

Dynamic IP

FortiGate-200A Administration Guide
Figure 27: IP/MAC binding options
Name
IP Address
MAC Address
To add a DHCP IP/MAC binding pair
1 Go to System > DHCP > IP/MAC Binding.
2 Select Create New.
3 Add a name for the IP/MAC pair.
4 Add the IP address and MAC address.
5 Select OK to save the IP/MAC pair.
You can view the list of IP addresses that the DHCP server has assigned, their
corresponding MAC addresses, and the expiry time and date for these addresses.
Interface Select to display its dynamic IP list.
IP The IP addresses that the DHCP server has assigned.
MAC The corresponding MAC addresses for the dynamic IP addresses.
Expire The expiry time and date for the dynamic IP addresses and their corresponding
MAC addresses.
To view the dynamic IP list
1 Go to System > DHCP > Dynamic IP.
2 Select the interface for which you want to view the list.
Enter a name for the IP/MAC address pair.
Enter the IP address for the IP and MAC address pair. The IP address must
be within the configured IP range.
Enter the MAC address of the device.
01-28006-0072-20041105
Dynamic IP
79