Fortinet FortiGate FortiGate-5001 Administration Manual page 363

Log & Report
FortiGate-5000 series Administration Guide
View per page
Line: /
Search
Advanced Search Select to search log messages by date, time and keywords.
Raw or
Formatted
To view log messages in the FortiGate memory buffer
1 Go to Log&Report > Log Access.
2 Select the log type you wish to view.
3 Select Memory from the Type list.
The log messages are displayed.
You can change the displayed columns or see the raw log messages, go to the
previous or next log page, or search the log by selecting the corresponding icon.
To view log messages in FortiGate disk drive files
1 Go to Log&Report > Log Access.
2 Select the log type you wish to view.
3 Select Disk from the Type list.
The log files are displayed.
4 Select the View icon for the log file you want to open.
The log messages are displayed.
You can change the displayed columns or see the raw log messages, go to the
previous or next log page, or search the log by selecting the corresponding icon.
Choosing columns
You can customize your log messages display using the Column Settings window.
The column settings apply only when the formatted (not raw) display is selected.
Go to next page icon. View to the next page in the log file.
Select the number of log messages displayed on each page.
Type the line number of the first line you want to display. The number
following the slash ("/") is the total number of lines in the log.
Type a search word and select Go.
Column settings button. Select to choose columns for log display.
Select Raw to switch to an unformatted log message display. Select
Formatted to switch to a log message display organized into columns.
01-28008-0013-20050204
Log access
363