Installing Tpm Kit - NEC Express5800 Series User Manual

Chapter 2 Preparations
Check the position of the TPM installer connector on the figure below.
TPM KIT CONNECTORS
1.7.1

Installing TPM Kit

To install the components, follow these steps.
1. Update System Utility
Please download the latest version from our support center website. For updating System utility,
please follow the instructions on the website.
2. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Temporarily remove options and cables that prevent the installation of TPM.
56
Important
Install TPM kit when the machine is not powered. Please make sure the
power cord has been unplugged to prevent personal injury, electrical shock,
or damage to the unit. The main machine cannot be turned off completely
just by using the POWER SWITCH on the front panel. Until the power cord is
unplugged from the power some internal circuits will remain energized.
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices