Table of Contents
Advertisement
Chapter 2 Preparations
1.5
TPM Kit
This section describes the procedure for installing optional TPM (Trusted Platform Module) Kit.
1.5.1
Installation
Install the TPM Kit in accordance with the following procedure.
1.
See the steps 1 to 5 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Pull the hard disk drive cage toward the front according to the steps in Chapter 2 (1.10 HDD Cages).
(For a 3.5-inch hard disk drive cage, only pull the hard disk drive.)
3.
Install the TPM Kit and secure it by
pushing the nylon rivet that comes with
the TPM Kit.
4.
Re-assemble the parts that were removed in the steps 1 and 2.
38
Note
The TPM kit once installed cannot be removed.
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
TPM kit connector
Advertisement
Table of Contents
