Chapter 2 Preparations
5.
Press the arrow of below figure then lock the latch to fix the LOM card.
6.
Fix the LOM card with two screws.
7.
See Chapter 2 (1.10 Riser Card) to install 1
8.
See Chapter 2 (1.6 Air Baffle) to install the Air Baffle.
9.
See Chapter 2 (1.5 Top Cover) to attach the top cover of the server.
10. Please see Chapter 2 (2. Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
Note
In order to prevent damage of the system due to improper cooling or elevated temperature,
please do not activate the server or enclosure without implementing any of component or
blank on all of drive bays and device bays.
Express5800/R120h-2E User's Guide
st
Riser Card.
1. Installing Internal Optional Devices
113