Installing The N8115-35 Tpm Kit - NEC Express5800 Series User Manual

Chapter 2 Preparations
Check the position of the TPM installer connector on the figure below.
TPM KIT ONNECTORS
1.6.1

Installing the N8115-35 TPM Kit

54
Important
Install TPM kit when the machine is not powered. Please make sure the power cord
has been unplugged to prevent personal injury, electrical shock, or damage to the
unit. The main machine cannot be turned off completely just by using the POWER
SWITCH on the front panel. Until the power cord is unplugged from the power some
internal circuits will remain energized.
Important
The surface becomes hot after use so to avoid burns please allow the drive and
internal parts of the system to cool before touching.
Express5800/R120h-1E User's Guide
1. Installing Internal Optional Devices