Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations
7. Connect the cable like below figure.
Orange
8. See Chapter 2 (1.6 Air Baffle) to install the air baffle.
9. See Chapter 2 (1.5 Top Cover) to attach the top cover.
10. Please see Chapter 2 (2. Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
1.18.2

Removal

The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
Color
Optical drive signal cable to SATA port 5
Blue
Yellow
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-2E User's Guide
Description
Optical drive power cable
Optical drive power cable
1. Installing Internal Optional Devices
121