NEC Express5800 Series User Manual page 174

Express server
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 3 Setup
Category
Memory
Use memory RAS
feature
Optional
Start the system from
board
installed option board.
Boot
Set the Boot Mode to
UEFI Mode according
to your OS.
Set the Boot Mode to
Legacy BIOS Mode
according to your OS.
Change the boot order
of devices
Use console redirection
feature
174
Description
Set System Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Memory Oprations - Advanced Memory
Protection
Set to Enabled in System Configuration >
BIOS/Platform Configuration (RBSU) > PCIe
Device Configuration > SlotXX – PCIe
Option ROM.
Change System Configuration >
BIOS/Platform Configuration (RBSU) > Boot
Options – Boot Mode to UEFI Mode *1
・The following OSs are applicable.
- Windows Server 2012 R2
- Windows Server 2016
- VMware ESXi6.0u3
- VMware ESXi6.5u1
Change System Configuration >
BIOS/Platform Configuration (RBSU) > Boot
Options – Boot Mode to Legacy BIOS Mode
*1
In case Boot Mode is UEFI Mode, change the
boot order in System Configuration > BIOS...
(RBSU) > Boot Options > UEFI Boot
Settings - UEFI boot Order Control
In case Boot Mode is Legacy BIOS Mode,
change the boot order in System
Configuration > BIOS... (RBSU) > Boot
Options - Legacy BIOS Boot Order.
Configure
BIOS/Platform
System Options > Serial Port Options >
BIOS Serial Console and EMS
Express5800/R120h-2E User's Guide
To be changed
in
System
Configuration
Configuration
(RBSU)
2. Description on System Utility
(2/4)
Remark
Some of RAS features may
not be used depending on
DIMM configuration.
XX is PCI slot number of
the installed option board
The setting must be done
in compliance with the
checklist before setup in
the installation guide of
your OS
For Windows: [Chapter 1
Installing Windows]
The setting must be done
in
compliance
with
the
checklist before setup in
the installation guide of
your OS
When you use CD/DVD,
set
CD/DVD
to
the
highest priority.
>
In
console
redirection
>
connection, if the corrupted
text
is
displayed
on
terminal screen, change
font type (character code)
appropriate
to
your
environment.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-2e

Table of Contents