Removing The Riser Card - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.10.2

Removing the Riser Card

Please prepare the following before installing the options.
 Parts included in the option kit.
 T-10 hexalobular driver
To install the components, follow these steps.
1. Backup all of the data for server.
2. See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Raise the screw handle at the top of the Riser Card, turn it 180 degrees to the left, hold the both ends of
the cage and lift it straight up to remove it.
・1st Riser Card
・2nd Riser Card
84
In order to prevent the damage to server's main body or the expansion board,
Note
please remove all the AC power cables before removing/installing Riser Card.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices