Chapter 2 Preparations
・8x 3.5-inch drive model(SAS/SATA HDD)
Front
Rear(OPTION)
1.25.1
Installing a SAS or SATA drive
Install a hard disk drive by using the following procedure.
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
Locate the slot where you install the hard disk drive.
Install hard disk drives in ascending order of port number.
2.
Remove the drive dummy tray.
Dummy trays are installed in every slot.
Note
In the RAID System, use hard disk drives that have the same specifications
(capacity, rotational speed, and standard) for each Disk Array.
Note
Keep the removed dummy trays for future use.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
139