NEC Express5800 Series User Manual page 89

Chapter 2 Preparations
Product Product Riser Card name
number name
Slot number
CPU connected
PCI standard
PCIslot performance *1
Bandwidth/lane *1
PCI board type*2
Slot size
Available size
25GBASE board(QSFP28/4ch)
N8104-188
[PCI Express 3.0(x16)]
Fibre Channel Controller(1ch)
N8190-165
[PCI Express 3.0(x8)]
Fibre Channel Controller(2ch)
N8190-166
[PCI Express 3.0(x8)]
Fibre Channel Controller(1ch)
N8190-171
[PCI Express 3.0(x8)]
Fibre Channel Controller(2ch)
N8190-172
[PCI Express 3.0(x8)]
Fibre Channel Controller(1ch)
N8190-163
[PCI Express 3.0(x8)]
Fibre Channel Controller(2ch)
N8190-164
[PCI Express 3.0(x8)]
N8116-84 SAS Expander gfsCard
● Standard Installation ○ Installation Available － Installation Not Available
The numbers stand for the order of installation.
*1 The data transfer rate of PCI slot is calculated from a transfer band multiplied by the number of lanes.
<Ex.> x8 lanes = 64Gbps (one way)
*2 Shows a connector size. Cards having the number of plugs or lower can be connected.
<Ex.> x8 Plug→ x1card, x4card, or x8card can be fit in. x16card cannot be fit in.
･ Refer to the technical guide for the detailed feature of each card.
･ The contents inside brackets next to product names show card's own maximum performances.
･ In case the performances are different between a PCI slot and a PCI board, the device operates on the lower
performance.
・FH: Full height
・FL: Full length
・HL: Half length
*3 Refer to the list of Riser Card slots for slot performance/ slot form of each slot.
*4 We offer various types of Riser Cards. Depending on the types of Riser Cards, performance, form and support PCI
card of a slot may be different. Check the compatibilities of PCI cards referring to the list of Riser Cards. Suppose
you intend to select N8104-188 25GBASE connection basic board. As far as Slot1 of Riser Card has the
performance/ form of x16, an N8104-188 25GBASE connection basic board can be mounted. In case Slot1 of Riser
Card has the performance/ form of x8, N8104-188 25GBASE connection basic board can not be mounted.
st
RAID LOM 1 Riser Card*3
－ － SLOT1 SLOT2 SLOT3
CPU1
PCIe3.0
x8 x8 x16 x8 x8 x8
8Gb/s
－ － x16 x8 x8 x8
Dedi- Dedi- FH FH FH FH
cated cated
312 312 168 168
to to
mm mm mm mm
RAID LOM
－ － 1 － － －
1
2 (1) (3)
－ －
(2)
1
－ － 2 (1) (3)
(2)
1
2 (1) (3)
－ －
(2)
1
2 (1) (3)
－ －
(2)
1
－ － 2 (1) (3)
(2)
1
－ － 2 (1) (3)
(2)
－ － 1 1 － －
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
nd
2 Riser Card*3
SLOT4 SLOT5 SLOT6
CPU2
x8 x8 x16 x8 x8
x8 x8 x16 x8 x8
FH FH FH FH
ALOM
168 312 312 168
Only
mm mm mm mm
－ － 2 － － Up to one board can be installed.
Do not install with
N8190-163/164/171/172
4 5 5 6
－
For N8116-74 Riser Card, install in order
of (x).
Do not install with
N8190-163/164/171/172.
－ 4 5 5 6
For N8116-74 Riser Card, install in order
of (x).
Do not install with
N8190-165/166
4 5 5 6
－
For N8116-74 Riser Card, install in order
of (x).
Do not install with N8190-165/166.
4 5 5 6 For N8116-74 Riser Card, install in order
－
of (x).
Do not install with N8190-165/166.
－ 4 5 5 6 For N8116-74 Riser Card, install in order
of (x).
Do not install with N8190-165/166.
－ 4 5 5 6 For N8116-74 Riser Card, install in order
of (x).
－ － － － －
Remarks
89