User Settings; Prior To Modifying The User Settings - Sanyo Denki SANUPS E11A Series Instruction Manual

User setting
§ 1 2 . U
§ 1 2 . U
§ 1 2 . 1 P
§ 1 2 . 1 P
The UPS has a user settings menu, described in §12.2 "Setup Menu List". The factory default setting of the
UPS is indicated by the " * " mark in the "Default Setting" column. You can set the various menu items to
configure the UPS according to your environment, your applications, and the specifications of the connected
load devices. Whenever you change a menu item setting, we recommend that you place a check mark in the
"Current Setting" column field of the Setup Menu List.
For details of setup operations of each menu, see the
All of the user setting menu items can be selected and set by display LED blinking pattern.
Setup menu list and the blinking pattern of indicators on the control panel are illustrated in the following
figure.
Select the menu by the blinking
pattern of 5 LEDs. The blinking
pattern changes each time you
press . Pressing this button
repeatedly cycles through the
LED blinking patterns.

User Settings

Guide
No.
Item
Ref. page
UPS operation
4 3.1
1
mode
Output voltage
2 5 3.2
(RESTART)
Indicates the section numbers of
sections with reference information
for each item. See the indicated
sections for detailed information.
Note
When you change the setting of the menus indicated by RESTART in the "Menu" column, its changes do not take effect
until you restart the UPS. If a restart is required, be sure to power off the load devices before resetting.
See §11.3 "UPS Shutdown (If Not to Be Used for More Than a Week)" about how to shut down the UPS, and §11.1 "UPS
Startup" for information about how to start the UPS
31
s e r S e t t i n
s e r S e t t i n
r i o r t o M o d i f y i n
r i o r t o M o d i f y i n
Menu LED
●: indicates that LED is blinking.
○: indicates that LED is off.
Menu Menu LED
○
●○○○
○
○●○○
For the menus indicated by
"RESTART" in this column,
restart of the UPS is required.
g s
g s
g t h e U s e r S e t t
g t h e U s e r S e t t
User Settings Guide.
Setting LED
Setting Setting LED
● ○ ○ ○
Auto
○ ● ○ ○
Double Conversion
● ● ○ ○
Economy
● ○ ○ ○
100V
○ ● ○ ○
110V
● ● ○ ○
115V
○ ○ ● ○
120V
The factory default
setting.
.
i n g s
i n g s
Select the setting by the blinking pattern
of 4 LEDs. The blinking pattern changes
each time you press . Pressing this
button repeatedly cycles through the
LED blinking patterns.
Default Current
Setting Setting
*
See
remarks
Place a check mark
when you change the
setting.
Remarks