Table of Contents
Advertisement
§
1
0
.
L
o
a
d
§
1
0
.
L
o
a
d
Connect the load devices.
① Check that MAIN SW is set to "OFF".
② Connect the input power plugs of the load devices to the output
terminals. The total output from all output terminals must not
exceed the capacity specified in the following table.
Model
The total load connected to the
outlets must not exceed
1.0kVA (0.7kW)
E11A102
Outlet Capacity AC125V 15A
NEMA 5-15R × 6
The total load connected to the
outlets must not exceed
1.5kVA (1.05kW)
E11A152U
Outlet Capacity AC125V 15A
NEMA 5-15R × 6
The total load connected to the
outlets must not exceed
1.5kVA (1.05kW)
E11A152U-J
Outlet Capacity AC125V 20A
NEMA 5-20R × 4
The total load connected to the
outlets must not exceed
2.0kVA (1.4kW)
E11A202
Outlet Capacity AC 125V 20A
NEMA 5-20R × 4
The total load connected to the
outlet must not exceed
2.0kVA (1.4kW)
E11A202U-J
Outlet Capacity AC 125V 30A
NEMA L5-30R × 1
The total load connected to the
outlet must not exceed
3.0kVA (2.1kW)
E11A302
Outlet Capacity AC 125V 30A
NEMA L5-30R × 1
Never connect the following types of load devices to the UPS.
Load devices
Copy machines, Laser printers,
Plain paper fax machines,
Overhead projectors, Hair-dryer, Cleaner
and so on.
Medical equipment, control equipment for
elevators and the like, computer systems
of public importance.
D
e
v
i
c
e
s
C
D
e
v
i
c
e
s
C
Outlet Capacity
.
.
.
.
.
.
Since such devices are subject to high transient current
surges, the UPS will detect the excess current and
backup will not be possible when there is a power
outage. There is also the risk of the UPS malfunctioning.
Special considerations such as system redundancy,
installation of emergency power generation facilities,
need to be given to operation, maintenance, and
management.
This completes the load devices connection.
o
n
n
e
c
t
i
o
n
o
n
n
e
c
t
i
o
n
Breaker is
OUTPUT max.700W 10A
MAIN SW
INPUT
Details
Load devices connection
"OFF"
OUTPUT max.700W 10A
MAIN SW
INPUT
Note
If the load devices are a
single-wire grounded
connection, always connect
the ground phase to the W
terminal (V phase) side.
U
E
V(W)
If the load devices are a
single-wire grounded
connection, always connect
the ground phase to the W
terminal (V phase) side.
U
E
V(W)
If the load devices are a
single-wire grounded
connection, always connect
the ground phase to the W
terminal (V phase) side.
U
E
V(W)
26
Hide quick links:
Advertisement
Table of Contents
