SECTION 4 - MACHINE OPERATION
Swinging the Boom
To swing boom, use Swing control switch to select
Right or Left direction.
WHEN SWINGING THE BOOM MAKE SURE THERE IS AMPLE ROOM FOR THE BOOM TO
CLEAR SURROUNDING WALLS, PARTITIONS AND EQUIPMENT.
NOTE:
On CE Market machines, when boom functions are being oper-
ated there is an interlock that prevents the use of Drive and Steer
functions.
Raising and Lowering the Boom
To raise or lower the Boom, position the Boom Lift con-
trol to Up or Down until the desired height is reached.
4-12
Telescoping the Main Boom
To extend or retract the boom, use the Telescope
Control Switch to select In or Out movement.
4.8
FUNCTION SPEED CONTROL
This control affects the speed of telescope and
swing. Turning the knob all the way counterclock-
wise until it clicks puts the drive, main lift, tele-
scope, and swing into creep mode.
4.9
MACHINE SAFETY SYSTEM OVERRIDE (MSSO)(CE
ONLY)
The Machine Safety System Override (MSSO) is
used to override function controls for Emergency
Platform Retrieval only. Refer to Section 5.5,
Machine Safety System Override (MSSO)(CE Only)
for operating procedures.
3121630