Sartorius ME415S Operating Instructions Manual page 96

Example
Determining the diameter of metal wires and filaments (such as a filament used in a light bulb)
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Diameter determination
Setup: Application parameters: Extra functions (F5): Product data memory
Step
1. Turn on the balance, if not on
2. Toggle to the parameter
display
3. Enter name for COMPANY
(in this example, Sartorius)
4. Confirm input
5. Enter density of filament
(in this example, tungsten)
6. Enter filament length in millimeters, then
exit parameter settings
7. Start diameter determination
The printout mode can be switched off in
the Setup menu (Setup: Printout: Application-
defined output: Auto print upon
initialization: Off)
Press key(s) (or follow instructions)
e
Param.
soft key
a ...
See also page 42
a,
soft key
l
soft key
q ,
1 9 . 2 5,
soft key
l
2 0,
soft key,
l
soft key
oo
Start
soft key
Display/Output
SARTORIUS
RhoW 19.25 g/
l 20 mm
# dec. 3
95