Sartorius ME415S Operating Instructions Manual page 36

Printout Parameters (Overview)
ο factory setting
√ user-defined setting(s)
SETUP Application-
Printout defined output
Automatic
output
of displayed
value
Output to
interface ports
Line format
ISO/GLP
printout
Identification #
Factory settings:
printout only
* = changing settings not applicable to verified balances
1)
= Information on use in legal metrology: Only permitted for control purposes; printouts are not allowed
2)
= auto print when load change is > 10 d and stability is reached: no printout until residual difference in load value is < 5 d
Stability parameter
Print on request, then tare
Auto print upon
initialization
(of the application)
Configured printout
Stability parameter
Stop auto print
Time-dependent
auto print
Serial communication
(PERIPHERALS)
Serial printer)
(PRINTER)
For raw data (16 characters)
o For other apps/
GLP (22 characters)
o Off
Only for calibration/adjustment
Always on
Lot ID (L ID):
ID1:
ID2:
ID3:
ID4:
No
Yes
1)
Without stability
o With stability
o Off
On
Off
o All values
Only main values
See own chapter starting
on the next page
o Without stability
At stability
Automatic after
2
weight change )
Use print key p
/r
o Not possible
o 1 display update
2 display updates
10 display updates *
100 display updates *
Off
o Application-defined output
Automatic output of displayed value
Off
o Application-defined output
Enter 20 characters max.
ID1
ID2
ID3
ID4
35