VERSION 07/2014
OPERATING MANUAL
7.4
WORK
Positions of the ball valve
1
Open: working position
2
Closed: The air motor can still be under pressure.
3
Vent: Operating pressure in the air motor is
vented (control pressure is still present).
1 Secure gun and place nozzle in the gun.
2 Slowly open the ball valve.
3 Set the required working pressure on the pressure
regulator.
4 Optimize the spraying results as laid down in the gun instructions.
5 Start work process.
Note: Depending on the function, the pump may continue running for 1 - 6
the spray gun is closed.
7.5
PRESSURE RELIEF / WORK INTERRUPTION
7.5.1
PRESSURE RELIEF / WORK INTERRUPTION
The pressure must always be relieved when:
- The spraying tasks are fi nished.
- Servicing the system.
- Carrying out cleaning tasks on the system.
- Moving the system to another location.
- something needs to be checked on the system or
- The nozzle is removed from the gun.
Observe general safety instructions in Chapter 4.
ORDER NUMBER DOC2349980
3
2
1
/min. after
B_04301
37