VERSION 07/2014
OPERATING MANUAL
Overpressure!
Risk of injury from bursting components.
5.2.4
FLUID SECTION (9)
The fl uid section has been designed as a double diaphragm pump with exchangeable inlet
and outlet valves. With the mixer (18 and 19) upstream relief valves (16) can be switched
"spraying mode" and "circulation mode".
5.2.5
POSITIONING
The Cobra pump may only be operated in a vertical position as
shown. Overhead operation is not permitted.
B_05063
Vertical position at
wall mount
Overhead operation or storage (air motor with pressure regulator below)
Air could get into the hydraulic circuit, causing a malfunction.
Avoid overhead operation or storage at all costs.
Venting, see chapter 8.2.6 Oil change
ORDER NUMBER DOC2349980
WARNING
Never change the safety valve setting.
B_5061
Vertical positioning
on trolley
NOTICE
B_5062
19