WAGNER Cobra 40-10/2K Translation Of The Original Operating Manual page 38

VERSION 07/2014
OPERATING MANUAL
High pressure spray jet!
Danger to life from injecting paint or solvent.
Process for relieving pressure
1 Close gun.
2 Close ball valve.
3 Vent air motor.
4 Release the system by opening the gun.
5 Close and secure gun.
Hardened working material in the spraying system when 2K product is processed!
Destruction of pump and injection system.
Follow the manufacturer's processing rules, particularly regarding the pot life.
Flush thoroughly before the end of the pot life.
ORDER NUMBER DOC2349980
WARNING
Never reach into the spray jet.
Never point the spray gun at people.
Consult a doctor immediately in the event of skin injuries caused
by paint or solvent. Inform the doctor about the paint or solvent
used.
Never seal defective high-pressure parts; instead relieve the
pressure from them and replace them.
Wear the appropriate protective clothing, gloves, eyewear and
respiratory protection.
NOTICE
38