4.1
Connection
1.
Open the rubber cover on the side of module and you will see the nano SIM
card socket. Insert your SIM card here. Note that only nano SIM cards can be
used. The SIM card is not hot swappable.
2.
Download and install USB driver from https://www.silabs.com/products/develop-
ment-tools/software/usb-to-uart-bridge-vcp-drivers.
3.
For the USB port, see the following steps. Insert the micro-B USB cable here
and note that it doesn't provide power for the WISE module.
4.
Plug a DC power source into the +Vs, -Vs pin of your module and turn on the
power.
4.2
Configuring WISE-4671 Using WISE Studio
WISE-4671 can be paired with WISE-S600 and WISE-S600T I/O modules. The
instruction for configuration uses WISE-S672 DI and RS-485 as an example. AI is
supported by WISE-S614 and there are also instructions for AI configuration in this
chapter.
4.2.1
Minimum System Requirements
The minimum system requirements for WISE Studio are as follows:
Microsoft Windows 7 or above
Microsoft NET framework 3.5 or above
Internet Explorer 10 or above
4.2.2
Installing WISE Studio
The latest version of WISE Studio is available on the Advantech support site: http://
support.advantech.com/. To install the program, download the installation file and
execute it locally.
WISE-4671 User Manual
30