Modifying The Stitching Start Position - Mitsubishi Electric PLK-G-CU-20 Technical Manual

6.Modifying the stitching start position

[Example] The stitching start position A point in the stitching data will be modified to the B point
as shown below.
Operation details
(1)Selecting the stitching start position movement
►
Enter the modification mode. (Refer to the methods for
entering the modification mode. Page[11]-1)
►
Press Stitch Data Change
Position Move
►
Press
Caution
move to the current stitching start position.
(*1)Take care when the needle is lowered, etc.
(2)Moving to the modification position and setting the data
►
Press the arrow icons to move the position to the B
point.
►
Press
(The sewing start position will be modified.)
Caution
undone, the work holder will automatically return
to the home position. Take care when the needle
is lowered, etc.
►
If is pressed here, the screen will change to
the previous screen.
(3)Confirming the modified data
►
Quit the modification mode. Press
the Saving mode screen. Press
Standard screen after saving the data.
(When
last will be undone.)
and Stitching Start
.
to set the data.
The work holder will automatically
.
When the modifications are
is pressed, the modifications executed
to change to
to return to the
[11] - 5