Mitsubishi Electric PLK-G-CU-20 Technical Manual page 173

<Continuation of [Clamp]>
Function
RP6
Repeat sewing 6
RP7
Repeat sewing 7
RP8
Repeat sewing 8
WHY
Priority of clamp mode
FSR
All cancel at over-step
movement
1PD
Valid or invalid 1 pedal
action
1T
Start delay setting for 1
pedal action
1A
Clamp 1 of output on delay
setting
2A
Clamp 2 of output on delay
setting
3A
Clamp 3 of output on delay
setting
4A
Clamp 4 of output on delay
setting
5A
Clamp 5 of output on delay
setting
6A
Clamp 6 of output on delay
setting
7A
Clamp 7 of output on delay
setting
8A
Clamp 8 of output on delay
setting
1B
Clamp 1 of output off delay
setting
2B
Clamp 2 of output off delay
setting
Unit Setting range
RP6: The repeat sewing operation is set.
- OF
ON
RP7: The repeat sewing operation is set.
- OF
ON
RP8: The repeat sewing operation is set.
- OF
ON
Sets the priority of clamp.
- OF
ON
The method of the clamp up for the step clamp movement is set.
- OF
ON
Sets the pedal specification (1 pedal/2 pedals).
- OF
ON
ms 0 ~ 5000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
ms 0 ~ 10000
The normal stitching operation is entered. (Repeat sewing RP6 is
invalidated.)
The repeat sewing RP6 is validated.(when the (RPT.) setting
[ON] only)
The normal stitching operation is entered. (Repeat sewing RP7 is
invalidated.)
The repeat sewing RP7 is validated.(when the (RPT.) setting
[ON] only)
The normal stitching operation is entered. (Repeat sewing RP8 is
invalidated.)
The repeat sewing RP8 is validated.(when the (RPT.) setting
[ON] only)
The movement setting of clamp 1 - clamp 8 can be randomly set.
The movement of clamp 1 - clamp 8 will be in the order of clamp
1 - clamp 8.
After all of the clamps have been lowered [ON], the clamps are
not raised [OFF] regardless the clamp step input signal is turned
[ON].
After all of the step clamps have been lowered [ON], when the
clamp step input signal is turned [ON] once, all of the clamps are
raised[OFF].
The normal operation (two pedals) is effective.
1 pedal action is valid. When start switch is pressed, clamp is
lowered and sewing is started automatically.
Waiting time between clamp down and start sewing is set
Sets the time (TA1) from the clamp input 1 ON
to clamp output 1 ON.
Sets the time (TA2) from the clamp input 2 ON
to clamp output 2 ON.
Sets the time (TA3) from the clamp input 3 ON
to clamp output 3 ON.
Sets the time (TA4) from the clamp input 4 ON
to clamp output 4 ON.
Sets the time (TA5) from the clamp input 5 ON
to clamp output 5 ON.
Sets the time (TA6) from the clamp input 6 ON
to clamp output 6 ON.
Sets the time (TA7) from the clamp input 7 ON
to clamp output 7 ON.
Sets the time (TA8) from the clamp input 8 ON
to clamp output 8 ON.
Sets the time (TB1) from the clamp input 1 ON
to clamp output 1 OFF.
Sets the time (TB2) from the clamp input 2 ON
to clamp output 2 OFF.
[16] - 2
Specification