7.Deleting a stitch (Deleting the designated No. of stitches)
[Example] The stitching pattern between the C point and D point in the following type of stitching data will be
deleted.
Operation details
(1)Selecting deletion of stitches
►
Enter the modification mode. (Refer to the methods for
entering the modification mode. Page[11]-1)
►
Press Stitch Data Change
Stitch Delete
►
Press
(2)Determining the deletion method and the deletion range (start point)
►
Press No. of Stitch Designation
►
Using Jog
position (C point).
►
Press
(3)Determining the deletion range (end point)
►
Using Jog
position (D point).
►
Press
Caution
the work holder will automatically return to
the start point. Take care when the needle is
lowered, etc.
and
.
to open the next screen.
,
, determine the start point
when the position has been set.
,
, determine the end point
when the position has been set.
When the end point is determined,
.
[11] - 7