Table of Contents
Advertisement
About Extension code 3 (EXT3)
* Press the Extension screen display key
These signal also controls output signal FN1~FNH as well as above mentioned extension code
(FUN1~FUNH). (Refer to P.[14]-9)
When code data F1_H is read in the pattern data while sewing, FN1 output is turned on.
When code data F1_L is read in the pattern data while sewing, FN1 output is turned off.
(Same as F2_H~FH_H、F2_L~FH_L)
Caution
Caution
Caution
[example．Timing chart when F1_H/F1_L code is set into the pattern data]
Progress of pattern data•→•→•→•→•→F1_H→•→•→•→•→F1_L→•→•→•→F1_H→•→•→•→•→•
FN1 output signal
[Example of prohibition]
[Same code repetition]・→・→・→F1_H→・→・→・→F1_H→・→・→・
[Start from off code] ・→・→・→F1_L→・→・→・→F1_H→・→・→・
[Mixed use]
PLEASE DO NOT USE [F1_H] CODE REPEATEDLY AFTER THE SAME CODE.
PLEASE DO NOT USE [F1_L] CODE REPEATEDLY AFTER THE SAME CODE.
PLEASE USE [F1_H] CODE AND [F1_L] CODE ALTERNATELY.
( Also F2_H~FH_H,F2_L~FH_L)
F1_L] CODE MUST BE INPUTTED AFTER [F1_H] CODE IS ALREADY
[
INPUTTED.
(Also F2_H~FH_H、F2_L~FH_L)
PLEASE DO NOT MIX
F1_L~ FH_L code in the same data.
ON
OF
OF
・→・→・→F1_H→・→・→・→FUN1→・→・→・
, and press
FUN1~FUNH code with F1_H~ FH_H or
OF
[7] - 24
.
ON
Hide quick links:
Advertisement
Table of Contents
