Modifying The Stitching Speed (N Stitches After Designated Position) - Mitsubishi Electric PLK-G-CU-20 Technical Manual

23.Modifying the stitching speed
(N stitches after designated position)
[Example] The stitching speed for three stitches from the B point to the C point in the following type of stitching
data will be changed to medium-high speed(MD1).
Operation details
(1)Selecting stitching speed modification
►
Enter the modification mode.
►
Press Stitching Speed Change
►
Press
(2)Determining the modification position and the
modification range (start point)
►
Press N Stitches
Stitch
►
Using Jog
position to be modified.(B point)
►
Press
(3)Determining the modification range (end point)
►
Using Jog
position to be modified.(C point)
►
Press
Caution
the work holder will automatically return to
the start point. Take care when the needle is
lowered, etc.
to open the next screen.
Change After Modified
.
, , determine the start point
after determining the positions.
, , determine the end point
after determining the positions.
When the end point is determined,
.
[11] - 48