In the sewing data input mode, you can call up the sewing data from the internal memory, and can combine
the called-up data with the currently-created data to create a new sewing data. You can determine whether
the first and final feed data should be deleted.
[Example of call-up function]
To create the following sewing data, preliminarily create the double circle data (
feed data and call-up functions.
Operation details
(1)Creation of data on feed data from home position H to point A
(2)Display of call-up screen
►
Press the data entry mode
►
Press
in the menu.
(3)Selection of call-up data
►
Select data to be called up, and then press
Caution
move in accordance with the called-up data.
If the needle is lowered, be careful not to get
injured.
Memo After calling up "feed" data, you can modify
the original "feed" data as follows
The feed data at the sewing start point can be deleted.
:
:
The feed data at the sewing end point can be deleted.
The feed data at the sewing start point can be left undeleted.
:
The feed data at the sewing end point can be left undeleted.
:
(4)For B, C, and D, call up the data in the same way, and complete the data.
[10] Call-up function
.
The work holder will automatically
.
[10] - 1
), and then use the