The Bobbin Winding Screen Is Explained Below; Explanations Of Basic Icons - Mitsubishi Electric PLK-G-CU-20 Technical Manual

5. The Bobbin Winding screen is explained below

This screen is used to wind thread on the bobbin. (The presser bar lifting will lower when the bobbin winding
icon is pressed on the Standard screen 2.)
When the work holder switch is turned ON and the start switch is turned ON, the sewing machine will start
rotating at the set speed. The XY table will not move at this time. The sewing machine will stop at the needle
UP position when the start switch is turned OFF.
* The bobbin winding operation is determined by the program mode setting. (Page[16]-10)
Exits the bobbin
winding mode.
*When exit winding mod, presser foot is raised.

6. Explanations of basic icons

The basic icons used commonly on several screens are explained in this section.
... Executes home position return.
... Enter : determines the settings, etc.
... Returns to the previous screen.
... Exits the current mode.
... Cancel : undo the previous operation.
... Opens the menu window.
... Displays the previous/next list when lists are displayed (pattern data list, mode list, etc.)
... Turns skip jogging ON/OFF, and opens the operation setting screens.
[3] - 4
Displays the current
setting value.