Skip Jogging - Mitsubishi Electric PLK-G-CU-20 Technical Manual

4.Skip jogging

Skip jogging allows movement to the target needle position at a faster speed than normal jogging. Skip
jogging can be used in the input, modification and conversion modes.
(1)
Turning skip jogging ON/OFF, and displaying the setting screen
►
Press
modification mode and conversion mode.
(The explanations are made with the Modification
Mode screen.)
(2)
Setting skip jogging
►
Determine whether to use (ON) or not use (OFF)
skip jogging.
►
Determine the movement method.
►
Using the numeric keypad, set the number of movement stitches.
►
Determine the function output method.
►
After setting, press
(3)
Skip jog operations
►
Skip jogging will start when
pressed. (
icons
.
Note Skip jogging will stop
if one of
found on the input screen menu, the
: Do not use. (OFF)
: Use. (ON)
: Move linearly.
: Move along a path.
: The output signal is invalid.
: The output signal is valid.
.
and
and are the normal jogging
are
is pressed.
[6] - 6