6.Point input
Operation points
▪ Designate point input(
(The distance between the points must be within 20mm)
[Example] The following type of sewing data will be created.
Operation details
(1)Inputting feed data to A point
►
Press
screen. After making the various settings on the Data
Setting Input screen, the Arrow Input screen will open.
(Refer to Page[6]-2)
►
Check that the code is set to FEED. If different code
is set, press
►
Press the arrow icons and move to the A point.
(Feed data to A point.)
(2)Setting feed data to A point
►
The movement amount can be confirmed.
►
Press
(Data on feed data to point A will be created.)
►
To change the stitching type to "POINT INPUT",
press the input method setting icon.
(In this case, the
(3)Designating point input
►
Press
►
Press
►
The system will return to the arrow input screen.
)
and
on the Standard
and set the code to FEED.
to set the data.
icon.)
.
and set the data.
[7] - 18