Table of Contents
Advertisement
About Extension code 1 (EXT1)
* Press the Extension screen display key
►"ASRT" : Automatic start after stopping
Using the numeric keypad, set the time that stops until
starting automatically.
About the Function code (FUN1～FUNH)
Output signal FN1 to FNH can be controlled by set in the pattern data. (Refer to P.[14]-9)
When code data FUN1 is read in the pattern data while sewing, FN1 output is reversed.
(same as FUN2～FUNH)
[example．Timing chart when FUN1 code is set in the pattern data]
Progress of pattern data•→•→•→•→•→FUN1→•→•→•→•→FUN1→•→•→•→FUN1→•→•→•→•→
FN1 output signal
Caution
ON
OF
PLEASE DO NOT MIX
with FUN1~FUNH code in the same data.
, and press
OF
F1_H~FH_H or F1_L~FH_L code
[7] - 23
.
ON
Hide quick links:
Advertisement
Table of Contents
