Explanations Of Standard Screen 2; The Up Counter Screen Is Explained Below - Mitsubishi Electric PLK-G-CU-20 Technical Manual

3. Explanations of Standard screen 2

Displays the Standard screen 2 from the Standard screen 1, by pressing
The Standard screen 2 is explained in detail below.
... Bobbin winding mode (The presser bar lifting will lower, and the Bobbin Winding Setting screen will
open.) (The details are explained on the next page.)
... Moves the needle up/down.

4. The Up Counter screen is explained below

(The Down Counter screen is the same, except for the valid/invalid icon design.)
* The methods of counting with the up counter (down counter) and clearing the counter are determined by the program
(Page[16]-7)
mode setting.
Changes the setting value
or current value.
Changes the validity of
the up counter.
Clears the current value.
(Press to clear the
setting value.)
Returns to the previous
screen.
●When this screen is displayed, sewing cannot be performed.
.
The Up Counter screen is displayed.
The Down Counter screen is displayed.
The counter value is displayed.
(Current value/setting value)
Returns to Standard screen 1.
A set value or the selected value is cleared.
[3] - 3
Same as Standard screen 1.
Displays the setting value
and current value.
Use to change the setting
value and current value.
Determines the
settings.(Returns to
Standard screen 2.)