Table of Contents
Advertisement
Home position/encoder/detector confirmation
The status of the home position and encoder detector is
displayed in an easy-to-read format.
▪The detector angle is the angle from the detected
DOWN position.
▪The encoder color will be alternately highlighted.
This means detection.
This means non-detection.
[Memo] Each display might be concealed by the error
message's giving priority according to the situation and being displayed. The magnetic of pulls motor
is released when entering this mode. When the
starting point return/the drive signal enters, the magnetic of pulls motor is turned on again.
Caution
Input setting (Custom input)
[Password function]
(1)Input Customize Setting screen
►
Press the physical input RAM (I1 to I9, IA to IP) to be
customized. The Function Section screen will open.
►Box which setting is changed from initiall setting is displayed
in revese.
(2)Function Selection screen
►
Press the
type.
(In this case, "SRT" is selected.)
(Refer to 3. Input signal setting table for details on the
signal types.)
►
To make detailed settings, press the "Details setting"
icon.
(3)Details Setting screen
►
Change the logic of the input signal.
(Normal/reversed)
►
Change the operation of the input signal.
(Normal/alternate)
►
Press the
screen will open.)
[Memo] Refer to [Control unit] Page [8]-3 for details on the
signal logic and operation.
Be careful! The sewing machine is ready for operation.
icons and select the signal
to fix the setting. (The previous
[14] - 3
Hide quick links:
Advertisement
Table of Contents
